Microwave making a loud noise

A soft hum is normal. Loud buzzing, grinding or rattling can come from the turntable, the cooling fan, or the heating parts.

Usually starts atFan, turntable or heating parts

Microwave oven · diagnosis note 04

Unusual noises

A soft hum is normal. Loud buzzing, grinding or rattling can come from the turntable, the cooling fan, or the heating parts.

Safe things to check first

  • Check the plate and roller ring sit properly.
  • If it buzzes loudly and doesn’t heat, stop using it.

What we’ll look at

Finds the source: turntable motor, cooling fan or the heating circuit.

Book a repair for this

Burning smell, sparks, or water near the socket? Switch off at the wall and unplug. Please don’t open panels or touch wiring. Leave electrical work to a technician.

Why it happens

Microwave making a loud noise: the usual causes

Most likely first. The first few are often things you can check yourself; the rest need a technician.

  1. Sounds that are normal

    A steady hum, the whirr of the fan and turntable, and a click when heating starts are all normal. On lower power levels most models switch the heating on and off in cycles, so the hum rises and falls with a click each time. Popping and hissing usually come from steam in the food.

  2. Rattling or grinding turntable

    A plate or roller ring that isn’t seated, a dirty or worn ring, or a dish touching the walls rattles and scrapes as it turns. Grinding or clicking from under the floor, with the plate stuttering, points to the turntable motor’s gears or a worn coupler.

  3. Noisy cooling fan

    A fan inside keeps the magnetron and other parts cool. Grease and dust on its blades, a worn motor bearing or a loose blade make it rattle, squeal or whine whenever the oven runs, and blocked vents make it worse. A fan that has stopped is worse than a noisy one: the oven can overheat.

  4. Loud buzz from the heating parts

    A loud, harsh buzz or drone, much louder than the usual hum, often comes from a failing high-voltage diode, capacitor, transformer or magnetron. It usually comes with weak heating or none. Stop using it: these parts can hold a dangerous charge even unplugged, and a failing one can damage the others.

  5. Crackling: arcing inside

    A snapping or crackling sound with flashes of light is arcing, not a noisy part. Metal in the cavity, a dirty or burnt waveguide cover on the cavity wall, or chipped paint inside is the usual cause. Stop it straight away, unplug it, and have it checked before using it again.

Stop and call

When to stop using it

  • A loud buzz or drone comes with weak heating or none.
  • You hear crackling, or see flashes or sparks inside the cavity.
  • It grinds under the floor, or the noise comes with a burning smell.
  • The fan has gone silent and the outside of the oven gets hotter than usual.

Prevention

How to stop it happening again

  • Keep the glass plate and roller ring clean and properly seated.
  • Leave the vents clear, with the space around the oven your manual gives.
  • Never run it empty, and keep metal out of microwave mode.

FAQs

Microwave making a loud noise: questions

Something else? Call +91 77604 72807

Is it normal for a microwave to make a humming noise?

Yes. A steady hum from the transformer and fan is normal, and on lower power levels it rises and falls as the heating cycles on and off. A hum that turns into a loud buzz or drone, especially if the food stays cold, is not normal: stop using it and have it checked.

Why is my microwave making a loud buzzing noise?

If the plate and ring are seated and nothing touches the walls, a loud buzz usually comes from the high-voltage parts: the diode, capacitor, transformer or magnetron. It often comes with poor heating. Don’t keep using it, and don’t try to repair it yourself: these parts can hold a lethal charge.

Why does my microwave fan keep running after cooking?

Many models keep the fan running for a few minutes after cooking, especially after grill or convection use, to cool the parts. That’s normal. If the fan runs all the time, even when the oven has been idle and cool for a long while, a sensor or control fault may be keeping it on.

How it works

From your call to a working appliance

Four steps, and you know the cost before anything is fixed.

  1. Select your appliance

    Pick it in the form, or just tell us on the phone.

  2. Tell us the problem

    What it’s doing, any error code, and the brand and model if you have them.

  3. Confirm inspection and estimate

    We agree a visit, inspect it at home, and give you the cost. Nothing starts until you say yes.

  4. Repair and testing

    We fix it, then test it with you before we leave.

Book a service

One home. Many appliances. One place to start.

Send the details and we’ll confirm a visit time by phone. Or just call.

Rather talk?+91 77604 72807 WhatsApp enquiry
Every day, 9 am – 9 pm
Bangalore, Karnataka

Service request

Takes about a minute. Nothing is stored.

Your details only go into the message you choose to send us. Nothing is stored on this website. Privacy