Refrigerator compressor clicking or not running

The compressor drives the cooling. If it clicks on and off, hums and stops, or never starts, the cause can be the power supply, the start relay, or the compressor itself.

Usually starts atCompressor, start relay or power supply

Refrigerator · diagnosis note 07

Compressor clicking or not running

The compressor drives the cooling. If it clicks on and off, hums and stops, or never starts, the cause can be the power supply, the start relay, or the compressor itself.

Safe things to check first

  • Check the socket works with another appliance.
  • Plug it straight into the wall, not a long extension lead.
  • If it keeps clicking, unplug it and book a check rather than restarting it again and again.

What we’ll look at

Tests the supply voltage, the start relay and overload, and checks whether the compressor runs.

Book a repair for this

Burning smell, sparks, or water near the socket? Switch off at the wall and unplug. Please don’t open panels or touch wiring. Leave electrical work to a technician.

Why it happens

Refrigerator compressor clicking or not running: the usual causes

Most likely first. The first few are often things you can check yourself; the rest need a technician.

  1. No power reaching the fridge

    A tripped MCB, a loose plug, a burnt socket or a stabiliser that has switched off all stop the compressor. If the fridge light is off too, start here. A stabiliser has its own lights or display, and a dead one looks exactly like a dead fridge.

  2. Low or fluctuating voltage

    A compressor needs a strong push of power to start. When the voltage drops, often in the evening, it hums, can’t get going, and its overload protector cuts it out with a click. It tries again a few minutes later, and repeated attempts heat it up and wear it.

  3. Restarted too soon after a power cut

    After the compressor stops, the pressures inside the cooling system need a few minutes to even out. Switch it back on too soon, or let the power flicker, and the compressor can’t start against that pressure, so it hums and trips. That’s why many fridges and stabilisers wait a few minutes before restarting.

  4. Start relay or overload fault

    Small parts fixed to the compressor help it start and protect it from overheating. When one fails, you hear a click, a short hum and silence every few minutes while the fridge warms. They sit under a cover at the bottom back and carry mains voltage, so leave them to a technician.

  5. Thermostat, control or defrost timer fault

    If the light is on and there’s no click and no hum, the compressor may simply not be getting the signal to run. A failed thermostat, temperature sensor or control board can cause this, and on some frost-free models a defrost timer stuck in its defrost stage keeps the cooling off.

  6. Compressor or inverter fault

    Sometimes the compressor itself has failed: it hums and trips even with good voltage and a healthy relay, or it runs without pumping. Inverter fridges also have a drive board that can fail. A technician tests the supply, relay and compressor before saying which, and you’re told plainly what it needs, and the cost, before any work.

Stop and call

When to stop using it

  • It clicks every few minutes and the fridge is getting warm. Unplug it.
  • You smell burning, see scorch marks on the plug or socket, or the MCB trips as it tries to start.
  • The stabiliser keeps cutting out or showing low voltage.

Prevention

How to stop it happening again

  • After a power cut or switching off, wait a few minutes before switching the fridge back on.
  • If the voltage at home goes outside your fridge’s rated range, use a stabiliser made for fridges, with a start delay.
  • Keep the space behind and beside the fridge clear, so the compressor isn’t working in trapped heat.

FAQs

Refrigerator compressor clicking or not running: questions

Something else? Call +91 77604 72807

Why does my fridge keep clicking but not cooling?

The click is usually the overload protector cutting the compressor out after it failed to start. Low voltage, switching back on too soon, a failing start relay or a weak compressor are the usual reasons. Unplug it, wait a few minutes, plug it straight into the wall socket and try once. If it still clicks, book a check.

How do I know if my fridge compressor is working?

Listen at the bottom back: a running compressor makes a steady low hum for several minutes at a time, then rests. On many fridges the sides of the cabinet get warm while it runs. If the light is on, the inside is warming and you hear only silence or clicks, it isn’t running. Don’t touch the compressor itself; it gets hot.

Do I need a stabiliser for my fridge?

Many newer fridges are built to run without one across a wide voltage range, which the manual or spec sheet gives. If the voltage at home often goes outside that range, or swings a lot, a stabiliser made for fridges, with a start delay, protects the compressor. Plug the fridge straight into it, not through an extension board.

How it works

From your call to a working appliance

Four steps, and you know the cost before anything is fixed.

  1. Select your appliance

    Pick it in the form, or just tell us on the phone.

  2. Tell us the problem

    What it’s doing, any error code, and the brand and model if you have them.

  3. Confirm inspection and estimate

    We agree a visit, inspect it at home, and give you the cost. Nothing starts until you say yes.

  4. Repair and testing

    We fix it, then test it with you before we leave.

Book a service

One home. Many appliances. One place to start.

Send the details and we’ll confirm a visit time by phone. Or just call.

Rather talk?+91 77604 72807 WhatsApp enquiry
Every day, 9 am – 9 pm
Bangalore, Karnataka

Service request

Takes about a minute. Nothing is stored.

Your details only go into the message you choose to send us. Nothing is stored on this website. Privacy