Washing machine showing an error code

Codes differ by brand and model. Each one points to a system, like drain, door or heating.

Usually starts atControl panel and sensors

Washing machine · diagnosis note 09

Error code on display

Codes differ by brand and model. Each one points to a system, like drain, door or heating.

Safe things to check first

  • Note the exact code, plus the brand and model from the label.
  • Switch off for a few minutes and restart once. If the code comes back, stop and book a check.

What we’ll look at

Reads the code for your model and tests the part it points to.

Book a repair for this

Burning smell, sparks, or water near the socket? Switch off at the wall and unplug. Please don’t open panels or touch wiring. Leave electrical work to a technician.

Why it happens

Washing machine showing an error code: the usual causes

Most likely first. The first few are often things you can check yourself; the rest need a technician.

  1. Water inlet codes

    Most brands have a code for water not reaching the right level in time. The causes match a machine that won’t fill: a closed tap, low pressure, a kinked hose, or a blocked inlet filter or valve.

  2. Drain codes

    A drain code means the water didn’t leave in time: a blocked filter, a kinked drain hose, a choked outlet or a failing pump.

  3. Door and lock codes

    These appear when the machine can’t confirm the door is locked: clothes caught in the seal, a worn latch, or a faulty door lock.

  4. Unbalance codes

    The machine sensed an unbalanced drum and stopped the spin. Spread the load and restart. If it keeps appearing with normal loads, the suspension or a sensor needs checking.

  5. Heating, motor and sensor codes

    Codes for the heater, temperature sensor, motor or control board need a technician with the right test equipment and your model’s service information. Restarting again and again won’t clear the cause.

Stop and call

When to stop using it

  • The same code comes back after one restart.
  • The code comes with a burning smell, a tripping MCB or a leak.
  • It’s a heating, motor or control board code.

Prevention

How to stop it happening again

  • Clean the drain and inlet filters as your manual describes.
  • Use the right detergent and load size for the programme.
  • Write down the code and the model number when it first appears: it speeds up the repair.

FAQs

Washing machine showing an error code: questions

Something else? Call +91 77604 72807

What should I do when my washing machine shows an error code?

Write down the exact code and the model number from the label. Switch off at the wall for a few minutes and restart once. Check the simple causes for that kind of code: tap, hoses, filter, door, load. If it comes back, stop and book a check.

Do error codes mean the same on every washing machine brand?

No. LG, Samsung, IFB, Bosch and Whirlpool each use their own codes, and they differ between models of the same brand. Your manual or the brand’s support page lists the codes for your model.

How do I reset a washing machine error code?

Switching off at the wall for a few minutes clears most codes, and the machine shows it again if the fault is still there. Clearing the code doesn’t fix what caused it.

How it works

From your call to a working appliance

Four steps, and you know the cost before anything is fixed.

A technician in gloves inspecting the door of a front-loading washing machine
Illustrative image, not a member of our team
  1. Select your appliance

    Pick it in the form, or just tell us on the phone.

  2. Tell us the problem

    What it’s doing, any error code, and the brand and model if you have them.

  3. Confirm inspection and estimate

    We agree a visit, inspect it at home, and give you the cost. Nothing starts until you say yes.

  4. Repair and testing

    We fix it, then test it with you before we leave.

Book a service

One home. Many appliances. One place to start.

Send the details and we’ll confirm a visit time by phone. Or just call.

Rather talk?+91 77604 72807 WhatsApp enquiry
Every day, 9 am – 9 pm
Bangalore, Karnataka

Service request

Takes about a minute. Nothing is stored.

Your details only go into the message you choose to send us. Nothing is stored on this website. Privacy