Washing machine not draining

Typically a blocked drain filter or hose, or a drain pump that has failed.

Corrugated washing machine drain hoses on their fittings
Usually starts atDrain pump and filter

Washing machine · diagnosis note 04

Machine not draining

Typically a blocked drain filter or hose, or a drain pump that has failed.

Safe things to check first

  • Check the drain hose isn’t kinked or pushed too far into the outlet.
  • If your manual shows a user-cleanable filter, clean it with the machine unplugged. Expect water.

What we’ll look at

Clears the pump and filter, tests the drain pump, and checks the hose run.

Book a repair for this

Burning smell, sparks, or water near the socket? Switch off at the wall and unplug. Please don’t open panels or touch wiring. Leave electrical work to a technician.

Why it happens

Washing machine not draining: the usual causes

Most likely first. The first few are often things you can check yourself; the rest need a technician.

  1. Blocked drain filter

    Coins, hairpins, buttons and lint collect in the pump filter, which many front-loaders have behind a small flap at the bottom front. A clogged filter means slow draining, water left in the drum, and often a drain error code.

  2. Kinked or blocked drain hose

    A hose squashed behind the machine, blocked with lint, or pushed too far into the outlet stops the water. If the end sits too low, water can also siphon back into the drum.

  3. Choked outlet or house drain

    Sometimes the machine is fine and the drain pipe is blocked. If a nearby sink or floor drain is slow too, the blockage is in the pipe, not the machine.

  4. Failed or jammed drain pump

    If you hear a hum but no water moves, or nothing at all from the pump, it may be jammed by a hard object or burnt out. A healthy pump makes a steady whirr while water flows.

  5. Semi-automatic drain selector

    On a semi-automatic, the wash tub drains only with the selector turned to Drain. A worn drain cable or valve, or lint blocking the outlet, leaves water standing in the wash tub.

  6. Lid switch, level sensor or control fault

    Some machines skip the drain step if the lid switch, water level sensor or control board misreads what the machine is doing. A code on the display often points here.

Stop and call

When to stop using it

  • There’s water in the drum and the door is locked: don’t force it.
  • The pump hums, buzzes or smells hot.
  • You’ve cleaned the filter and checked the hose, and it still won’t drain.

Prevention

How to stop it happening again

  • Empty pockets, and use a mesh bag for small items and underwired bras.
  • Clean the drain filter regularly if your manual shows a user-cleanable one.
  • Keep the drain hose free of kinks, at the height your manual gives.

FAQs

Washing machine not draining: questions

Something else? Call +91 77604 72807

How do I drain a washing machine full of water?

Switch off at the wall and unplug it first. If your manual shows a drain filter with an emergency hose, lay towels and a shallow tray down and drain it slowly: it can be a lot of water. If there’s no user drain, or you’re unsure, leave it shut and book a visit. We drain it before opening.

Why is my washing machine draining slowly?

Slow draining is almost always a partial blockage: a filter full of lint, a kinked hose or a choked outlet pipe. A weak pump is less common. Clean what your manual allows, check the hose, and book a check if it’s still slow.

Why is there water left in my washing machine after the cycle?

A little water in a front-loader’s door seal is normal. Water standing in the drum is not: the drain didn’t finish, usually because of a blocked filter, a blocked hose or a failing pump.

How it works

From your call to a working appliance

Four steps, and you know the cost before anything is fixed.

A technician in gloves inspecting the door of a front-loading washing machine
Illustrative image, not a member of our team
  1. Select your appliance

    Pick it in the form, or just tell us on the phone.

  2. Tell us the problem

    What it’s doing, any error code, and the brand and model if you have them.

  3. Confirm inspection and estimate

    We agree a visit, inspect it at home, and give you the cost. Nothing starts until you say yes.

  4. Repair and testing

    We fix it, then test it with you before we leave.

Book a service

One home. Many appliances. One place to start.

Send the details and we’ll confirm a visit time by phone. Or just call.

Rather talk?+91 77604 72807 WhatsApp enquiry
Every day, 9 am – 9 pm
Bangalore, Karnataka

Service request

Takes about a minute. Nothing is stored.

Your details only go into the message you choose to send us. Nothing is stored on this website. Privacy